+ Reply to Thread
Results 1 to 1 of 1

Thread: Points to electronic dizzy conversion help.

  1. #1
    1 man disaster zone xy-transit's Avatar
    Join Date
    Sep 2008
    Ute Capital of the world
    24" hotfoot cruiser

    Default Points to electronic dizzy conversion help.

    Fitted an XD/XE crossflow into my uncle's f350,

    The old loom has 2 wires in one plug that goes to the coil, I've put a multi meter on them and both have 12v to them. Never mind I just worked out as I was typing, they share a plug so until I cut the plug off they'll both show 12v... (Facepalm)

    I've googled with little help. How do I wire it all up to the coil and the dizzy?

    I've had a look at an XF, it has wires shared with the coil and dizzy.

    All help is greatly appreciated!
    Last edited by xy-transit; 25-04-2018 at 01:48 PM.
    plasma cutter + TIG + 2k paint= to infinity and beyond!

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts