+ Reply to Thread
Results 1 to 2 of 2

Thread: Ford xc head conversion

  1. #1
    Junior Member
    Join Date
    Mar 2009
    Ride
    ef xr6
    Posts
    23

    Default Ford xc head conversion

    Hi all,
    Was wanting information about my Ford xc 250.
    It has a cast iron head with a Holley 350 carburettor.
    I have found a alloy head that has had alot of work done eg porting and so on.
    Would this fit on my old block and would this be a great performance upgrade? Also will the existing manifold and extractors bolt back on new head?
    Thanks for your time
    Justin
    Last edited by justin01; 03-04-2017 at 04:03 PM.

  2. #2
    1 man disaster zone xy-transit's Avatar
    Join Date
    Sep 2008
    Location
    Ute Capital of the world
    Age
    38
    Ride
    24" hotfoot cruiser
    Posts
    1,264

    Default Re: Ford xc head conversion

    Yes it will bolt onto your block.

    But intake manifold has different water jackets and bolt pattern is different, same with extractors unless they are the multi fit ones. They have extra bolt holes that won't have bolts in them.

    As for performance, if it's had port and valve work it will be an upgrade.
    plasma cutter + TIG + 2k paint= to infinity and beyond!

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts