+ Reply to Thread
Results 1 to 4 of 4

Thread: LHS Indicators not working

  1. #1
    Junior Member
    Join Date
    Oct 2014
    Ride
    FG ute
    Posts
    2

    Default LHS Indicators not working

    Well I have checked all 3 globes on the LHS and all are OK. Anyone got any ideas?

  2. #2
    Junior Member
    Join Date
    Oct 2014
    Ride
    FG ute
    Posts
    2

    Default Re: LHS Indicators not working

    should say 2010 FG Ute as well

  3. #3
    Experienced Member baboon's Avatar
    Join Date
    Oct 2005
    Location
    Geelong, VIC
    Ride
    BA XR6T JTG LPG
    Posts
    455

    Default Re: LHS Indicators not working

    Ok the indicator lamps are driven by the instrument cluster.

    The column switch when switching them from left or right feed power to the left or right circuit of the cluster.

    If there is a break in the left hand wire from the column switch to the cluster then you wont have LHS indicators working.

    May have to open up the column switch to see if there are any breaks in the wires.

    Good luck.

  4. #4
    Experienced Member baboon's Avatar
    Join Date
    Oct 2005
    Location
    Geelong, VIC
    Ride
    BA XR6T JTG LPG
    Posts
    455

    Default Re: LHS Indicators not working

    Also if not a broken wire, there may be some connectors not quite seated right under the steering column which may contain wires from the column switch to the instrument cluster...



+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts