We’re looking at expanding and rejuvenating these rooms so my question is open to all, what are your ideas?
If you have any ideas to help boost discussion and the community feel of the place, then please reply to this thread.
I’ve started up a new gallery dedicated to the Ford Fiesta, KA and Festiva. I've added up a few photos although anyone is welcome to add up more photos for others around the world to see.
You can view the Fiesta, KA and Festiva gallery here:...
For Sale almost brand new Recaro seats out of a new Fiesta ST, car has only done 2,500km. - $1,000
Is being converted to a rally car so i have no need for the interior.
i will also have a standard six speed close ratio from the ST available soon, and the 17" mag wheels.
Hi all, I bought my first ever new car a Ford Fiesta Zetec 3 months ago and I am having a couple issues with it that I don't like much and I wondered if I can ask if anyone else has these issues too.
First the noises, the car has quite loud at the engine when idling (fan belt?) when it gets warm. ...
Hey guys- I am currently selling my pedders lowering springs for a ford fiesta 2010-2013
I had them in my car for about a month (upgraded to coilovers)
Awsome ride whilst they were in- and the car looked good aswell!
Not entirely sure how much they lowered my car by!
Im selling them for...
Replacing ECU in WS Fiesta: Any Ford techs here?
I am replacing my ECU and having trouble getting the car to start;
I assume it needs to be programed to the key, immobiliser and body control module? or can I replace the key, body control module and maybe the dash out of the car the ECU came...
After a good run of reliable driving my Fiesta purchased new in '05 died suddenly last night while driving. :(
Was driving home from shopping last night when without warning not even a splutter the engine stopped. After coasting to the side of the road had full electricity and engine cranks over...
I just bought a 2010 WS Fiesta Zetec. 3 years old but only 20,000km on the dial. Bright blue, 5 speed manual. I have to say, I love it. It has a surprising amount of power for a little car, and corners like it's on rails. The sound system is very good too. Not as good as the Alpine system with...
is it possible to get ford service to update the ECU with the Focus tune?
eg going from the 89kw 151Nm tune to the Focus 93kw 159Nm tune?
they both are the same engine, both the same fuel and both the same rpm limits
now 4kw is nothing to get excited about but 8Nm would be great plus the Focus...
Love my 3dr '04 Fiesta I've owned since new but there are some dumb elements that could have been designed better one of which is the 3dr Hatch Seat release handle that tilts the seats back forward, the release mechanism is operated by 2 cables from a single point to seat handle near the headrest....
Bought my late '04 Fiesta bought new in '05 has had an intermittant problem for a while where the Speedo needle drops to Zero for 10 to 30 seconds sometimes weeks apart or sometimes each time I drive.
Note - the ODO also stops during this time.
Anyone know of a similar problem affecting...
new to your site
the heater demister for my fiesta's front screen has no air flow hot or cold coming out of the center vent no matter what setting you move the control knob to
i swung the glove box door down and I can see movement when I turn the air selector. all other positions work but...
Hi I have a ford fiesta cl 5 door hatch on order... I ride a 8 foot mini mal surfboard and hoping I can slide it in from the boot to the front instead of opting for racks, anyone else surf and can get board in the car????? 8ft????
Hi all. My 2011 Fiesta WT Zetec (auto) is my first ever car and while I love it to bits I have been starting to have a few concerns lately about the quality of the stock parts.
I just had the tyres changed today (after only 30K on the stock Continentals, got some Hancooks as they are cheapest )...
Does anyone know if the DSC in a new WT Fiesta can be switched off? There is no button for it and no option in the menu. I see that the new Focus can have the DSC turned off by going through the menu settings but no such offering on the Fiesta.
I was wondering if the 2004-2008MY fiesta was ever offered with cruse control as an option at this side of the world??
Can any one tell me please where the pcv valve is located on a 2004 wp zetec ?
I have a hiss noise that seems to be coming from the fitting with the red clips connected to the fuel regulator I think. Is this normal and if not where can I get a new fitting. Thanks in advance. The car is a wp zetec 1.6L fiesta 2004
Just wondering do the petrol engine have a EGR valve and if yes where can I find it on the engine, it was suggested that this could be a problem with rough idle.
Where can I get a Custom Sun Shade for 2012 Fiesta or off the shelf that fits?
No luck with conventional suppliers. ( Repco, Auto One, Super Cheap, Big W, Target, Autopro.
Ford have upped the fuel economy of the Fiesta Econetic to 3.6L per 100kms.
4 x genuine alloy 16" rims from a 2011 WT Fiesta. (4 x 100 stud pattern)
Fitted with Continental Conti Premium Contact 2 195/50 R 16 (They have 96 km on them so I'm saying 100% tread).
I've seen them for sale for $1000 to 1,200 on ebay and pumaspeed etc.
Lets say $800 ONO
Hey guys, well after a few weeks of air conditioning hell I now seem to have it working ok, but can someone with a WQ fiesta please check to see how their a/c fan runs. I.e start the car, leave in park/neutral, turn the ac on and wait for the fan to kick on. Now what I need to know is how long does...
Ford Reduces Fiesta Prices
Ford Australia has reduced recommended Fiesta prices across the range
Side curtain/thorax and driver’s knee airbag now standard in CL
All Ford passenger cars now achieve a 5-star Australian New Car Assessment Program rating
MELBOURNE, 06 Sept, 2012
My mum picked up a new WT Fiesta today. It wasn't until she was taking delivery and the salesman was showing her (and me) around the car that we were told there was no spare wheel and no jack. Living in a rural area, it could take hours for a tow truck to arrive if the goop they...
Hi there just recently purchased a 2004 fiesta ghia for my partner she loves the car but I'm a bit concerned in the noise that the car makes on a regular basis whilst driving and in a stationary position
The car makes like a tak noise every 7 to 10 seconds sounds like its coming from behind the...
I just went to look at the wheel specifications of the WT Fiesta. It looks like Ford has discontinued the sedan, as it's not shown as an option on the Ford Australia website.
There was no mention of that when my mum bought her Fiesta 5 weeks ago.
I recently hit a pothole and my wheel is bent and the tyre blown. Getting a new one is so expensive.
Other than from the dealers, where else could i get a new one? If somebody has one that is not used and still in good condition, i would be interested in buying it.
Or if you guys have an...
My daughter has a 2004 WP Fiesta 2-door manual & it is a great little car but it has this annoying noise when on the open road. It almost sounds like it is around the windscreen wiper (drivers side when at rest) when buffeted by a gust of wind but only when the gust comes from a certain direction...
hi, i thought i would post over on these forums to ask of anyone in VIC who knows some good mechanics who have worked on the duratec engines. im looking at having some cams fitted to my 2.0 duratec i4, i would get my mechanic to fit them, but because he rarely works on my engine, costs will be out...
Hey guys, hopefully someone can help me. I have lost my lock nut for my fiesta, and even though I have the ID number, my dealer cannot get a new one as it is made in the UK, and they won't chase it up for me either (Awesome) They offered to remove them for approx $600. Obviously this is ridiculous...
I am after the stripes for my sisters fiesta, could any one please measure them and post the measurements? i have a friend who does car graphics for drift events and can cut vinyl to any size.
so ,mums 06 fiesta has developed some issues.
The engine has a slight lump to it and sounds like its misfiring. The engine will not rev past 4k, at all. Also the check engine light is on, i had a friend come past with a scanner and has been told that its misfiring. I have removed the...
Bit new in this. Can anyone please help me out. Why do they say that a towbar cant be fitted to a WS Zetec? To my understanding all the chasis are the same, so all the mounting points will be the same.(or not?)
Interesting video with a good result for the Fiesta Econetic.
Hey all. My moms WQ Fiesta, has been acting a little strange for the last year or so. Every now and then when you start it, it will stall, then you have to restart and it will do it again, and then maybe again, i think the record was 7 times.
Changed, fuel and air filters and have cleaned out...
Hi all we've got an '04 Fiesta Zetec with 26000k's. It has a noisy waterpump and Power Ford at Castle Hill in NSW have quoted approx $1100 to fix it. They told me I will also need a new fan belt as the ONLY WAY to remove the old belt is to cut it off!
I find this very hard to believe and I asked...
We just saw the production Focus ST revealed, and now here's the Fiesta version.
It has a turbocharged 1.6L 4cyl producing 132kW and 240Nm.
Looks great to me and I especially like those headlights!
I am new on here and just wanted to see if anyone has had any experiences with towing a small trailer behind a Fiesta. I have this years model and would like a small trailer to make an occassional tip run 5 x 3 size or there abouts. The reason for my question is that 99%...
Dealer principal has solved my problem
Over my last 30 years of driving changing to ever bigger cars every 4 to 5 years then after buying missus a Mazda 6 Wagon was after a car that I wanted to drive, one that was simple, solid and fun harking back to my first car a SSS'd Datsun 1600 4spd in '81. :confused:
After comparing the Fiesta...
Have had a strange transient thwang noise develope in 1st gear at exactly 4,300rpm, any ideas what it could be ? :confused:
Strange had my clutch, pressure plate & thrust bearing/slave cylinder replaced at 63,000kms to get rid of a thrust bearing noise on release ( apparently a semi common...
My wife and and I have 2009 WS Fiesta Zetec.
Love it but I'd like an extra cog or taller 4th. As far as city cars go it's brilliant.
If anyone on the forum has or knows of some good condition second hand OEM Zetec 16" rims let me know. I only need one, but if the price is right.........
For your interest...
To be honest, I'm not sure why they didn't compare the Fiesta with a Polo Blue Motion (such a thing exists doesn't it?) and in all fairness, they do...
You'd hope and expect to see the diesel version of the new Fiesta when it's launched next year, and hopefully we'll see this version here in Australia.
Note the recardo seats, big wheels, lower suspension, extra exhaust pipe and the intercooler.
There's talk of an EcoBoost 1.4 or 1.6L 4cyl producing around 120-140kWs.
If I want to make a complaint to Ford who do I address it to?
I am planning to downsize from my Focus to the Fiesta Zetec SD if I can ever get hold of one for a test drive.
I am very impressed by all the details I have read on the subject of the DSG design and performance. There seems to be very little on the negative side other than what I see as minor...
Hey all. I have a 2006 Ford Fietsa, well my partners car. We purchased it new in 06. Anyway, it has just come out of warranty and it needs a service. Its almost at 70,000km's. Does anyone know where i can get a service manual for this car? Also am i better off using genuine service parts? or is...
Hey everyone, Im new to the Ford Australia forums but im around on a few of the CJ Lancer forums. I personally own a 2008 Lancer but have joined up here as im seeking some help for an issue I am having with my mums WQ Fiesta.
Basicly what is happening with the car is when the car is at idle,...
my names bryce and im new to this forum :redface:
i own a 2007 white fiesta xr4
got custom black stripes and 17" matte black rims, 1 metre pumaspeed sticker.
aftermarket leater gaitor and gear knob.
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.