View Full Version : AUII ECU removal HELP

20-02-2008, 04:34 PM
hi guys i need to pull out my ecu its from a AUII XR6 ute so i can feed cable into the door for new speakers, ive had a look at it and well it doesnt look like it wants to come out and seeing its my work car i dont want to *#!@ it up so if any one knows how to take them out plz let me know other wise i mite just take it down to autobahn this w/e

thanks guys

20-02-2008, 06:45 PM
isnt it just held by a screw holding the clamp?

20-02-2008, 09:20 PM
nar there an earth crimp with a plastic cover with wat looks like a one way screw only 3mm its on the door side of the ecu i just didn't want to got and pull it off and not be able to replace it but if i can just use a normal screw to replace it i'll take it out

22-11-2008, 11:44 AM
Ok it should have a plastic plug at the top of the ecu bracket and a big rivet with a earth lead atached underneth prise the plastic plug out and drill out the rivet the interior part of the bracket lifts out of its holder on the inside!
To replace!
I just used a m6 tap were the plastic plug was and resucured the bracket and earth wire with m6 bolt
Hope this helps Mark